[Pdns-users] Internal DNS for .LAN Domain

[Daniel Miller]

No disrespect intended - but based on your post I'm inferring you're 
very new to PowerDNS.

There's a separation between the authoritative server and the recursor. 
These are totally separate processes. You *must* understand that before 
proceeding. Read the PowerDNS docs for these servers until you grasp 
that.

I'm assuming you haven't setup a recursor - at least not properly for 
this application. What you need is to configure either "forward-zones" 
or "forward-zones-file" appropriately in recursor.conf, and then have 
your system use the configured recursor.

Read up on those sections a bit - post back if you still need help.
---
Daniel


------ Original Message ------
From: "David Jones via Pdns-users" <pdns-users at mailman.powerdns.com>
To: "Steven Christensen" <sdchristen at gmail.com>; 
"pdns-users at mailman.powerdns.com" <pdns-users at mailman.powerdns.com>
Sent: 2/23/2020 6:40:07 PM
Subject: Re: [Pdns-users] Internal DNS for .LAN Domain

>The “name” field must be the full hostname that ends with the domain 
>name to be valid.
>
>
>
>Here’s an example from a working zone:
>
>
>
>MariaDB [powerdns]> select * from domains limit 1;
>
>+----+------------+--------+------------+--------+-----------------+---------+-----+
>
>| id | name       | master | last_check | type   | notified_serial | 
>account | cas |
>
>+----+------------+--------+------------+--------+-----------------+---------+-----+
>
>|  1 | ha.ena.net | NULL   |       NULL | MASTER |      2019121901 | 
>2169    |     |
>
>+----+------------+--------+------------+--------+-----------------+---------+-----+
>
>1 rows in set (0.00 sec)
>
>
>
>MariaDB [powerdns]> select * from records where domain_id = 1 limit 5;
>
>+----+-----------+--------------------+------+-------------+-------+------+-------------+-----------+------+----------+
>
>| id | domain_id | name               | type | content     | ttl   | 
>prio | change_date | ordername | auth | disabled |
>
>+----+-----------+--------------------+------+-------------+-------+------+-------------+-----------+------+----------+
>
>|  2 |         1 | test.ha.ena.net    | A    | 1.2.3.4     |   300 |    
>0 |  1539287429 | NULL      |    0 |        0 |
>
>|  7 |         1 | ha.ena.net         | NS   | ns1.ena.net | 86400 |    
>0 |  1572025749 | NULL      |    0 |        0 |
>
>|  8 |         1 | ha.ena.net         | NS   | ns2.ena.net | 86400 |    
>0 |  1572025749 | NULL      |    0 |        0 |
>
>|  9 |         1 | tickets.ha.ena.net | A    | 96.5.2.23   |   300 |    
>0 |  1539287429 | NULL      |    0 |        0 |
>
>| 10 |         1 | ldap.ha.ena.net    | A    | 96.4.2.38   |   300 |    
>0 |  1572025750 | NULL      |    0 |        0 |
>
>+----+-----------+--------------------+------+-------------+-------+------+-------------+-----------+------+----------+
>
>5 rows in set (0.00 sec)
>
>
>
>From: Pdns-users <pdns-users-bounces at mailman.powerdns.com> on behalf of 
>Steven Christensen via Pdns-users <pdns-users at mailman.powerdns.com>
>Reply-To: Steven Christensen <sdchristen at gmail.com>
>Date: Sunday, February 23, 2020 at 5:42 PM
>To: "pdns-users at mailman.powerdns.com" <pdns-users at mailman.powerdns.com>
>Subject: [Pdns-users] Internal DNS for .LAN Domain
>
>
>
>This isn't working... any ideas?
>
>
>
>Added to database fine...
>
>-------------------------------------------------
>
>INSERT INTO domains (name, type) values ('1.168.192.in-addr.arpa', 
>'MASTER');
>
>INSERT INTO domains (name, type) values ('lan', 'MASTER');
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (1,'lan','localhost admin.example.com 1 10380 3600 604800 
>3600','SOA',86400,NULL);
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (2,'1.168.192.in-addr.arpa','localhost admin.example.com 
><http://admin.example.com> 1 10380 3600 604800 3600','SOA',86400,NULL);
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (1,'lan','localhost','NS',86400,NULL);
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (2,'1.168.192.in-addr.arpa','localhost','NS',86400,NULL);
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (1,'dns1','192.168.86.254','A',3600,NULL);
>
>INSERT INTO records (domain_id, name, content, type,ttl,prio)
>VALUES (2,'192.168.1.254','dns1','PTR',3600,NULL);
>
>-----------------------------------------------------------------------------
>
>[root at dns1 pdns]# nslookup
> > server
>Default server: 192.168.1.254
>Address: 192.168.1.254#53
> > 192.168.1.254
>** server can't find 254.1.168.192.in-addr.arpa: NXDOMAIN
> > dns1
>Server:         192.168.1.254
>Address:        192.168.1.254#53
>
>** server can't find dns1: REFUSED
> > dns1.lan
>Server:         192.168.1.254
>Address:        192.168.1.254#53
>
>** server can't find dns1.lan: NXDOMAIN
> > .lan
>nslookup: '.lan' is not a legal name (empty label)
>----------------------------------------------------------------------------------
>
>/etc/hosts only has 127.0.0.1 localhost
>
>/etc/resolv.conf only has server 192.168.1.254
>
>----------------------------------------------------------------------------------
>
>sort of works?
>
>[root at dns1 pdns]# ping dns1.lan
>PING dns1.lan(dns1.lan (fe80::4637:e6ff:fec4:a391%eno1)) 56 data bytes
>64 bytes from dns1.lan (fe80::4637:e6ff:fec4:a391%eno1): icmp_seq=1 
>ttl=64 time=0.043 ms
>64 bytes from dns1.lan (fe80::4637:e6ff:fec4:a391%eno1): icmp_seq=2 
>ttl=64 time=0.049 ms
>64 bytes from dns1.lan (fe80::4637:e6ff:fec4:a391%eno1): icmp_seq=3 
>ttl=64 time=0.061 ms
>
>
>
>-----------------------------------------------------------------
>
>etc/pdns/pdns.conf
>
>launch=gmysql
>gmysql-host=localhost
>gmysql-user=pdns
>gmysql-password=XXXXX
>gmysql-dbname=powerdns
>master=yes
>
>---------------------------------------------
>
>firewall-cmd --add-service=dns --permanent
>  firewall-cmd --reload
>-----------------------------------------------------------------
>
>Anything else I can post that would help?
>
>---------------------------------------------------------------
>
>
>
>
>
>
>
>
>
>Thanks,
>
>
>
>Steve
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.powerdns.com/pipermail/pdns-users/attachments/20200302/972a0711/attachment.htm>