[Pdns-users] Installation PDNS Server auf Raspberry Pi (weezy)

[abang]

Hi Gerald,

it works on my Pi. So there must be a config failure on your side. 
Please try

/usr/sbin/pdns_recursor --daemon=no --trace=yes

on commandline and try again with dig and post us the error messages if 
present.



Am 16.08.2013 14:20, schrieb Gerald:
> Hi Marc,
>
>
> I have done as written in the citation below and the compilation worked
> with putting a lot of messages like this:
> Warning: swp{b} use is deprecated for this architecture
>
> The program is running, but not delivering an address:
>
> pechoc at bmeson-a:~$ dig facebook.com A @192.168.10.233
>
> ; <<>> DiG 9.8.1-P1 <<>> facebook.com A @192.168.10.233
> ;; global options: +cmd
> ;; Got answer:
> ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 4233
> ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
>
> ;; QUESTION SECTION:
> ;facebook.com.			IN	A
>
> ;; Query time: 8 msec
> ;; SERVER: 192.168.10.233#53(192.168.10.233)
> ;; WHEN: Fri Aug 16 14:13:11 2013
> ;; MSG SIZE  rcvd: 30
>
> I have a Raspberry Pi Type B with Debian Wheezy.
>
> kind regards
> Gerald
>
> On 2013-08-16 13:58, Marc Haber wrote:
>> pdns-users is an english language mailing list.
>>
>> On Fri, Aug 16, 2013 at 10:09:44AM +0200, abang wrote:
>>>> aber ich brauche eines für Debian auf Raspberry Pi.
>>> wo du ein fertiges Binary für armv6l bekommst weiß ich nicht. Aber
>>> du könntest versuchen, selbst zu kompilieren.
>>>
>>> apt-get install libboost-dev
>>> wget http://downloads.powerdns.com/releases/pdns-recursor-3.5.2.tar.bz2
>>> tar -xjf pdns-recursor-3.5.2.tar.bz2
>>> cd pdns-recursor-3.5.2
>>> ./configure
>>> make all
>>>
>>> Ich versuchs auch gerade. Dauert allerdings gefühlt ewig auf dem Pi ;-)
>> The PowerDNS recursor cannot be compiled on arm architectures. It
>> needs a feature called swapcontext which is not available on arm. See
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579194
>>
>> Greetings
>> Marc
>>