[Pdns-users] Powerdns server is not passing Authority parameter
frank+pdns at tembo.be
frank+pdns at tembo.be
Tue Jan 19 09:21:28 UTC 2021
Hi,
Could you share the configuration of the PDNS Auth server please?
Frank Louwers
Certified PowerDNS Consultant @ Kiwazo.be <http://kiwazo.be/>
> On 19 Jan 2021, at 10:08, Dedan Irungu via Pdns-users <pdns-users at mailman.powerdns.com <mailto:pdns-users at mailman.powerdns.com>> wrote:
>
> I have made the changes request as soon below. The server does not serve authoritative results.
>
> setLocal('85.10.203.183')
> setACL({'0.0.0.0/0 <http://0.0.0.0/0>', '::/0'}) -- Allow all IPs access
>
> newServer({address='85.10.203.183:5300 <http://85.10.203.183:5300/>', pool='auth'})
> newServer({address='85.10.203.183:5301 <http://85.10.203.183:5301/>', pool='recursor'})
>
> recursive_ips = newNMG()
> recursive_ips:addMask('127.0.0.1/8 <http://127.0.0.1/8>') -- These network masks are the ones from allow-recursion in the Authoritative Server
>
> addAction(NetmaskGroupRule(recursive_ips), PoolAction('recursor'))
> addAction(AllRule(), PoolAction('auth'))
>
>
>
> I have tried to target powerdns directly via port 5300 but the result is the same. Any dig performed on port 5300 should be authoritative but in this case it is not.
>
> dig @85.10.203.183 <http://85.10.203.183/> gifsitebuilder.com <http://gifsitebuilder.com/> A -p 5300
>
>
>
>
> On Tue, Jan 19, 2021 at 11:51 AM Brian Candler <b.candler at pobox.com <mailto:b.candler at pobox.com>> wrote:
> On 19/01/2021 08:40, Dedan Irungu via Pdns-users wrote:
>> recursive_ips:addMask('0.0.0.0/0 <http://0.0.0.0/0>') -- These network masks are the ones from allow-recursion in the Authoritative Server
>>
>> addAction(NetmaskGroupRule(recursive_ips), PoolAction('recursor'))
> These two lines together say: "for incoming queries from *any* IP addresses: send them to the recursor".
>
> Try changing the first one to something like:
>
> recursive_ips:addMask('192.168.0.0/16 <http://0.0.0.0/0>') -- netblock containing your local clients
>
> Then queries from 192.168.x.x will go to the recursor, whereas queries from any *other* addresses will go to the authoritative server.
>
> _______________________________________________
> Pdns-users mailing list
> Pdns-users at mailman.powerdns.com <mailto:Pdns-users at mailman.powerdns.com>
> https://mailman.powerdns.com/mailman/listinfo/pdns-users
Frank Louwers
PowerDNS Certified Consultant @ Kiwazo.be
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.powerdns.com/pipermail/pdns-users/attachments/20210119/0a793537/attachment.htm>
More information about the Pdns-users
mailing list